DuPont Inge Dizzer 5000 Plus Wr (dizzer 5000Plus WR) UF Membrane Module Analogue

• Customization: Available
• Membrane Type: Hollow
• Type: UF
• Model NO.: TF7B0.9D-50PWR
• Membrane Material: Modified Pes (Polyethersulfone), Tips
• Pore Size: 0.02 Um
• Fiber ID/Od: 0.9 mm/4 mm
• Flow Direction: Inside-out
• Membrane Area: 50 M2
• Diameter: 250 mm
• Length: 1680 mm
• Connection: DN 50
• Analogue: DuPont Inge Dizzer 5000 Plus Wr
• Transport Package: Paper Carton
• Specification: 195*39*50 cm
• Trademark: Tanal
• Origin: China
• HS Code: 8421999090
• Production Capacity: 50000 Pieces/Year

Product Description

Product Description

General Information

TF7B0.9D-50PWR is manufactured as the direct analogue to DuPont Inge dizzer 5000 Plus WR (dizzer 5000Plus WR) VK-0068 UF membrane module.
TaFlux SevBore D series ultrafiltration membrane modules TF7B0.9D-50PWR are designed and manufactured as equivalents, which are used for production of process water, potable water and wastewater. Major applications are the filtration of surface water, potable water, seawater and industrial wastewater. TaFlux SevBore D series ultrafiltration modules use Tanal's SevBore fiber technology with an inside-out flow direction. SevBore fibers are naturally hydrophilic 7-bore PES hollow fibers by advanced ultrafiltration technology, which makes TaFlux SevBore D series ultrafiltration membrane modules the most robust PES (polyethersulfone) UF membrane on the market.
The mode of operation of TF7B0.9D-50PWR is either dead-end or cross-flow (though cross flow mode is only used in certain circumstances), backwash (with filtrate only) at regular intervals and chemically enhanced backwash are required for the continuous operation.

Features

• A nominal pore size of 0.02 μm for optimal removal of particles, bacteria and viruses
• Inside-out flow direction without air scouring
• PES membrane fibers of 7 bores
• Typical filtrate quality SDI ≤ 3, turbidity ≤ 0.1 NTU

Advantages

• Extremely high mechanical strength with no fiber braekage
• High chemical tolerance
• High-quality filtrate by reliable blocking of microorganisms and viruses
• Minimum operating costs and efficient backwash
• Economical analogues as direct replacement of DuPont Inge dizzer 5000 Plus WR (dizzer 5000Plus WR) VK-0068

Applications

• Surface water
• Potable water
• Seawater desalination
• Pre-treatment of industrial water
• Industrial wastewater

Module Dimensions

Model	Total length L (mm/inch)	Length feed connectors L1 (mm/inch)	Length without end caps L2 (mm/inch)	Length top feed to filtrate connector L3 (mm/inch)	End cap clamp diameter D (mm/inch)	Diameter without end caps D1 (mm/inch)	Connector length W (mm/inch)	Feed, Filtrate connector (d)
TF7B0.9D-50PWR	1,680/66.14	1,600/62.99	1,485/58.46	190/7.48	295/11.61	250/10	55/2.17	2"

Specifications

Model	TF7B0.9D-50PWR
Effective membrane area (m²/ ft²)	50/538
Fiber ID/OD	0.9/4 mm (0.06/0.16 inch)
Membrane material	Modified PES (polyethersulfone), 7 bores
Flow direction	Inside-out
Pore size	0.02 μm
Housing material	UPVC
End cap material	UPVC
Clamp material	Stainless Steel
Sealing material	EPDM
Potting material	Epoxy resin
Feed/filtrate connector	DN50
Weight (kg/lbs.)	55/120

 

Operating and Cleaning Limits

Temperature range	1-40ºC (34-104°F)
Max. rate of temperature change (per minute)	5ºC (9°F)
Max. feed pressure	5 bar (72.5 psi)
Max. rate of pressure change (per second)	0.5 bar (7.25 psi)
Max. trans-membrane pressure	1.5 bar (21.75 psi)
Max. backwash pressure	3 bar (43.5 psi)
Filtration flux	60-180 L/m^2·h (35-105 gfd)
Max. backwash/forward flush	230-300 L/m^2·h (135-175 gfd)
pH-continuous operation @ 25ºC	2 - 11
pH-CIP @ 25ºC	1 - 13
Hypochlorite (NaOCl) for cleaning	50 to 200 ppm
Hydrogen peroxide for cleaning	100 to 500 ppm

 

Certifications

ISO 9001:2015 Quality Management Systems Certificate
TÜV Audit Certificate
Export License
Certificate of Origin

Packaging & Shipping

Our Advantages

1. Customer-centric company culture
2. Efficient and flexible organizational system
3. 20+ years experience in membrane research, development and manufacturing
4. Better cost-effectiveness

Inquiry Handling Process

Order Handling Process

After Sales Service

1. Warranty granted.
2. Remote technical training, guidance and support.
3. On-site technical support for training, installation, commissioning, operation and trouble shooting.
4. Free replacement in warranty period.
Feedback Handling Process as below:

FAQ

Picking up the phone and having the plant manager yelling at you about undelivered membranes and filters?
Your customers are complaining to you about the high costs of existing membranes and filters?
Feel frustrated in prices when you are bidding?

Send your inquiry to us and get a quote for your project now!