Hydranautics Hydracap Max 40-a UF Membrane Equivalent

• Customization: Available
• Membrane Type: Hollow
• Type: UF
• Model NO.: TFMAX52
• Membrane Material: PVDF
• Pore Size: 0.08 Um
• Fiber ID/Od: 0.6 mm/1.2 mm
• Flow Direction: Outside-in
• Membrane Area: 52 M2
• Diameter: 250 mm
• Length: 1364.9 mm
• Connection: DN 50 Coupling
• Equivalent: Hydranautics Hydracap Max 40-a
• Transport Package: Paper Carton
• Specification: 152*48*48 cm
• Trademark: Tanal
• Origin: China
• HS Code: 8421999090
• Production Capacity: 50000 Pieces/Year

Product Description

Product Description

General Information

TFMAX52 is manufactured as the direct equivalent, replacement, alternative, retrofit and analogue to replace Hydranautics HYDRAcap MAX 40-A UF membrane module.
Hydranautics HYDRAcap MAX 40-A equivalent ultrafiltration (UF) membrane module TFMAX52 is a pressurized module, which is designed and manufactured for the filtration of surface water, potable water, seawater and industrial wastewater. These UF modules are made of new generation PVDF hollow fiber membrane with high fouling resistance and hydrophilicity.

TFMAX52 UF modules are applied in flexible UF systems, providing high-quality filtrate by removing suspended solids, colloids, pyrogens, bacteria, viruses and other impurities to protect downstream processes such as NF and RO.

Features

• Outside-to-inside flow direction
• New generation PVDF hollow fiber
• Uniform pore size of 0.08 μm
• Typical filtrate turbidity ≤ 0.1 NTU
• Bacteria removal ≥ 4 log

Advantages

• High tolerance for feed water
• High-quality filtrate
• Less energy needed for high flux
• Longer service life by high fouling resistance and mechanical strength
• Economical equivalent module for direct replacement of Hydranautics HYDRAcap MAX 40-A

Applications

• Surface water
• Potable water
• Beverage clarification
• Industrial process water
• Reclaimed water reuse
• Industrial wastewater
• Pre-treatment of seawater desalination

Module Dimensions

Model	L (mm/in)	L1 (mm/in)	L2 (mm/in)	D (mm/in)	D1 (mm/in)	W (mm/in)	Connection port	Air inlet
TFMAX52	1364.9/53.74	1257.3/49.5	1135.5/44.7	250/9.84	290/11.42	172/6.8	DN50	3/8" FNPT

Specifications

Specifications	Parameters
Model	TFMAX52
Effective membrane area (m²/ft²)	52/560
Filtrate flow rate m^3/h (gpm)	1.7 - 6.2 (7.5 - 27.3)
Dry weight (KG/lbs)	41/90
Wet weight filled with water (KG/lbs)	73/161
Membrane material	PVDF (Polyvinylidene Fluoride)
Fiber ID/OD	0.6/1.2 mm (0.024/0.047 inch)
Flow direction	Outside-in
Pore size	0.08 μm
Housing material	UPVC
Potting material	Epoxy resin

Operating and Cleaning Limits

Type of operation	Dead-end flow or cross flow
Typical flux (25°C)	34 - 120 L/m^2·h (20 - 71 gfd)
Temperature	1 - 40°C (34 - 104°F)
Maximum feed pressure (20°C)	5 bar (73 psi)
Maximum feed pressure (40°C)	3 bar (44 psi)
Maximum trans-membrane pressure	2 bar (30 psi)
Backwash flux (25°C)	75 - 120 L/m^2·h (48 - 71 gfd)
Maximum backwash pressure	2.5 bar (36 psi)
Maximum air scour feed pressure	2.5 bar (36 psi)
Air scour flow	12.3 - 15.4 Nm^3/h (7.3 - 9.1 acfm)
Air scour duration	2 - 4 minutes
Air scour frequency	Once every 20 - 60 minutes
pH-Continuous operation @25°C	2 - 11
pH-Cleaning @25°C	1 - 13
Maintenance cleaning frequency	1 - 3 times per day
Maintenance clean duration	20 - 30 minutes
Disinfection chemicals	NaClO, ClO2 or NH2Cl
Cleaning chemicals	NaOH, HCl, H2SO4 or citric acid
Instantaneous chlorine tolerance	5,000 ppm
Maximum chlorine exposure	750,000 ppm-hrs
Maximum feed TSS	100 ppm
Maximum feed turbidity	300 NTU
Maximum feed particle size	300 µm
Filtrate SDI15	≤ 2.5
Filtrate turbidity	≤ 0.1 NTU

Certifications

ISO 9001:2015 Quality Management Systems Certificate
TÜV Audit Certificate
Export License
Certificate of Origin

Packaging & Shipping

Our Advantages

1. Customer-centric company culture
2. Efficient and flexible organizational system
3. 20+ years experience in membrane research, development and manufacturing
4. Better cost-effectiveness

Inquiry Handling Process

Order Handling Process

After Sales Service

1. Warranty granted.
2. Remote technical training, guidance and support.
3. On-site technical support for training, installation, commissioning, operation and trouble shooting.
4. Free replacement in warranty period.
Feedback Handling Process as below:

FAQ

Picking up the phone and having the plant manager yelling at you about undelivered membranes and filters?
Your customers are complaining to you about the high costs of existing membranes and filters?
Feel frustrated in prices when you are bidding?

Send your inquiry to us and get a quote for your project now!