DuPont Memcor L10n Ultrafiltration Membrane Module Analogue

• Customization: Available
• Membrane Type: Hollow
• Type: UF
• Model NO.: TFL10NP
• Membrane Material: PVDF (Polyvinylidene Fluoride), Tips
• Pore Size: 0.04 Um
• Fiber ID/Od: 0.6 mm/1.1 mm
• Flow Direction: Outside-in
• Membrane Area: 21.1 M2
• Diameter: 119 mm
• Length: 1157 mm
• Outer Net Material: PE
• Analogue: DuPont Memcor L10n
• Transport Package: Paper Carton
• Specification: 125*15*15 cm
• Trademark: Tanal
• Origin: China
• HS Code: 8421999090
• Production Capacity: 50000 Pieces/Year

Product Description

Product Description

General Information

TFL10NP is as the direct analogue to DuPont MEMCOR L10N Ultrafiltration Membrane Module.
TaFlux COR series ultrafiltration (UF) membrane module TFL10NP is a pressurized integrated module, which is designed and manufactured for the filtration of surface water, potable water, seawater and industrial wastewater. These UF modules are made of upgraded new generation TIPS (thermally induced phase separation) PVDF hollow fibers with high tensile strength and extra permeability.

TFL10NP is applied in new systems, as well as directly connected to existing UF systems as replacements, providing high-quality filtrate by removing suspended solids, colloids, pyrogens, bacteria, viruses and other impurities to protect downstream processes.

Features

• Outside-to-inside flow direction
• New generation PVDF hollow fiber
• Nominal pore size of 0.04 μm
• Typical filtrate quality SDI ≤ 3, turbidity ≤ 0.1 NTU

Advantages

• Upgraded design for easy installation
• High-quality filtrate
• Less enegry needed by extra high permeability
• Longer service life by high mechanical strength and fouling resistance
• Economical analogues as direct replacement of DuPont MEMCOR L10N Ultrafiltration Membrane

Applications

• Surface water
• Potable water
• Beverage clarification
• Reclaimed water reuse
• Industrial wastewater
• Pre-treatment of seawater desalination

Module Dimensions

Model	Length (mm/inch)	Diameter (mm/inch)
TFL10NP	1,157/45.56	119/4.69

Specifications

Model	TFL10NP
Effective membrane area (m²/ft²)	21.1/227
Membrane material	PVDF (Polyvinylidene Fluoride), TIPS
Fiber ID/OD	0.6/1.1 mm (0.02/0.04 inch)
Flow direction	Outside-in
Pore size	0.04 μm
Outer net material	PE
Head material	ABS
Potting material	Polyurethane

 

Operating and Cleaning Limits

Type of operation	Dead-end flow or cross flow
Design flux (25°C)	40 - 110 L/m^2·h (24 - 65 gfd)
Temperature	1 - 40°C (34 - 104°F)
Maximum feed pressure (25°C)	4 bar (60 psi)
Maximum trans-membrane pressure	3 bar (45 psi)
Operation trans-membrane pressure	0.2 - 1.5 bar (3 - 22 psi)
Backwash flux (25°C)	50 - 120 L/m^2·h (30 - 70 gfd)
Maximum backwash pressure	2.5 bar (36 psi)
Maximum air scour feed pressure	2.5 bar (36 psi)
Maximum air scour flow	2 - 5 Nm^3/h (1.12 - 3.1 scfm)
pH-Continuous operation @25°C	1 - 13
Maximum NaClO	5,000 mg/L
Maximum feed TSS	100 ppm
Maximum feed turbidity	300 NTU
Maximum feed particle size	300 µm
Filtrate SDI15	≤ 3
Filtrate turbidity	≤ 0.1 NTU

 

Certifications

ISO 9001:2015 Quality Management Systems Certificate
TÜV Audit Certificate
Export License
Certificate of Origin

Packaging & Shipping

Our Advantages

1. Customer-centric company culture
2. Efficient and flexible organizational system
3. 20+ years experience in membrane research, development and manufacturing
4. Better cost-effectiveness

Inquiry Handling Process

Order Handling Process

After Sales Service

1. Warranty granted.
2. Remote technical training, guidance and support.
3. On-site technical support for training, installation, commissioning, operation and trouble shooting.
4. Free replacement in warranty period.
Feedback Handling Process as below:

FAQ

Picking up the phone and having the plant manager yelling at you about undelivered membranes and filters?
Your customers are complaining to you about the high costs of existing membranes and filters?
Feel frustrated in prices when you are bidding?

Send your inquiry to us and get a quote for your project now!